|
The B&G Circuit Sensor Flow Meter is a precision machined wafer-type orifice insert
that is installed between standard 125, 150, 250 or 300 psi ANSI flanges, to monitor
system flow with a minimum friction head loss.
System flow is determined by obtaining a differential pressure across the flow meter
orifice by sensing upstream and downstream pressures through the readout valves, then
referring to the calibrated nameplate for the corresponding flow.
Circuit Sensor Flow Meters are suitable for a maximum
operating temperature of 250ºF (121° C), and are equipped with RV-125A Readout Valves
fitted with an integral EPT check valve designed to minimize system fluid loss during the
monitoring process.
· Body:
Cast iron Readout
· Valves: Brass, with integral EPT check
valve
|
